When a choke is used at an angle of less than 120 degrees (see next page), the sling-rated capacity must be adjusted downward.Ī choker hitch should be pulled tight before a lift is made - NOT PULLED DOWN DURING THE LIFT. The diameter of the bend where the sling contacts the load should keep the point of choke against the sling BODY - never against a splice or the base of the eye. A choker is used when the load will not be seriously damaged by the sling body - or the sling damaged by the load, and when the lift requires the sling to snug up against the load. When two or more slings are attached to the same lifting hook, the total hitch becomes, in effect, a lifting bridle, and the load is distributed equally among the individual slings.ĬHOKER hitches reduce lifting capability of a sling since this method of rigging affects ability of the wire rope components to adjust during the lift. A tagline should be used to prevent load rotation, which may damage a sling. Full rated lifting capacity of the sling may be utilized, but must not be exceeded. VERTICAL, or straight, attachment is simply using a sling to connect a lifting hook to a load. Description General Information-Wire Rope Slings Every Lift Uses 1 of 3 Basic Hitches
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |